TRANSVASA 18 6EK

18 EMPTYING POINTS
6 POSITION TEAR-OFF WHEEL FOR CROWN CORKS

The „TRANSVASA 18 6EK“ is designed for emptying glass bottles. It is designed as a monobloc consisting of an 18-position carousel for emptying and a 6-position tear-off wheel. All emptying points are designed as backpressure valve with long tube. There are flexible hoses at the tips of the emptying tubes for reaching into the bottle to the base of the bottle. Optimum emptying can thus be achieved. The „pressing empty“ (purging) principle using gas (e.g. CO2) prevents the CO2 release of the product. The product is stabilised in a pressure tank and collected and automatically conveyed further with the included pump.

The complete machine is designed so that all parts coming into contact with the product are made of stainless steel, plastic, rubber (e.g. O-rings) or Teflon. Door panels are made of Makrolon. The remaining parts of the machine are made of stainless steel or plastic. The table plate is made of St 50 and inserted in a plate made of stainless steel. All areas of the machine are accessible through secured doors or detachable covers. The mechanical and electrical safety devices comply with TÜV, UVV, VDE, CE standards.

The completeness of bottles at the infeed and a possible jam at the discharge are monitored using sensors. The speed of the drive which has a safety coupling can be controlled using a frequency controller. Other machine characteristics: Mechanical pressing cylinder which presses the bottles on the valve, built-in, height-adjustablebottle transporter across the machine width, can be connected for CIP cleaning, height-adjustable conveyor belt, calottetype feet for precise height alignment.